Building automation
How to scope a building automation integration
A building automation integration starts with the decisions a facility team makes during a shift.
By Globalesm
A building automation integration starts with the decisions a facility team makes during a shift. An HVAC issue, a recurring alarm, or a missing meter reading can each provide a narrow first project. Document the affected equipment and the team responsible for responding.
Inventory the installed systems
Record the controllers, software, site boundaries, and available interfaces. If the facility uses Automated Logic or Carrier equipment, confirm the installed products and the permitted data access with the owner. Use the inventory to establish which signals can be collected reliably.
Define how operators use the data
Choose the points needed for one operating view and describe what each one means. Capture equipment names, units, expected update frequency, and what qualifies as a stale signal. Keep a separate list of proposed control actions, with approval and commissioning requirements for each.
Prove it on a small scope
Pick a site or equipment group for the first test. Verify ordinary readings, missing updates, and an alarm the operator can identify and resolve. Hand over the point map and escalation responsibilities so the facility can support the connection after launch.
Put the plan into practice
Share the systems involved and the handoff your team needs to improve.